WORKSHOP
BikeWise & Run's workshop is kitted out with top quality tools and equipment from Park Tools including the super sturdy electric bike stand that can hold the heaviest e-bikes, to tools to suit the ever-expanding standards of bottom brackets, and I am Cytech certified.
I am a Bosch & Shimano certified repairer and have full Bosch e-bike diagnostic capabilities allowing us to diagnose faults, update software for the various components on the e-bike keeping your bike up to date, it also allows us to print off a full system report for the customer showing any errors recorded and the battery health. With the Shimano software I am able to look after your e-bike, again carry out fault diagnosis, software updates and full report print outs, it also allows me to do all of the above on the Shimano DI2 electronic gear shifting system.
We have an open plan workshop/showroom area so you can see bikes being serviced or repaired while and chatting. I repair everything from punctures to full bike strip down and re-builds. We are also a recognised supplier and fitter of the Ridewrap bike protection kits, a great way to protect your pride and joy from scrapes and scuffs, tailor made kits available to order for most bike frames and forks, give me a call to discuss and check out www.ridewrap.com.
I am always on hand to advise you what service level or individual charges suit your bike the best, targeting the area's most in need and giving you the best value for money.
For more information and pricing, please feel free to call 01570640070 or 07816936209.
- Full inspection of the bike and its parts
- All bearings checked
- Tyres checked and pressures adjusted
- Brakes checked and adjusted
- Chain checked and cleaned & lubed if not excessively worn
- Drivetrain inspectedd
- All bolts checked and tightened to correct torque
- Full inspection of the bike and its parts
- All fasteners checked and torqued
- Drivetrain removed, cleaned and re-fitted
- Gears indexed and hanger aligned
- Brakes bled and/or adjusted
- Gears indexed and hanger aligned
- Wheels trued
- Gears indexed and hanger aligned
- Tyre pressure adjusted
- All fasteners checked and torqued
- Cables lubricated where applicable
Full Service - Full strip down to bare frame
£160
- Full inspection of the bike and its parts
- All fasteners checked and torqued
- Drivetrain removed, cleaned and re-fitted
- Headset bearings cleaned and re-greased
- Gear cable inner and outer replaced
- Gears indexed and hanger aligned
- Brakes bled and/or adjusted
- Wheels trued
- Tyre sealant topped up
Suspension Wheels
Wheel Build - Mavic Spokes
£65
Fit Tyre/Tube (Internal gear hub)
£20
Tubeless Conversion (Pair Inc Milk/Valve/Tape)
£55
Frame
Headset Fit (frame only)
£15
Frame Bearing Swap Per Pivot
£25
Frame Bearing Swap (Maximum)
£100
Frame Bearing Swap (frame only)
£65
RideWrap Fitting (frame and fork)
£901
Full Custom Bike Build
£100
Drivetrain
Gear Index (front and rear)
£30
Fit Gear Cable and Index
£25
Brakes
Brake Lever/Caliper Rebuild
£30
Brake Hose Shorten and Bleed
£20
Fit Brake (internally routed)
£30
Brake Adjust (per brake)
£10
Misc
Stuck Bolt Removal
from £25
Build/PDI from box (kids)
£30
Dropper Post Service - Basic
£40
Dropper Post Service - Basic
£40
Dropper Post Service - Full rebuild
£65
Dropper Post Lever Bleed
£20
Suspension Set Up - In store
£40
Fault check and software updates
£25
Bosch and Shimano e-bike and DI2 diagnosis and software updating
If further time is required for investigation, we will contact you to discuss and to request further time with costs before continuing with diagnosis